主要技術指標Specific Ation

測定方法 Test Measures

中位經：以NSKC-1A離心式光透射粒度測定儀測得粒徑分布累計重量百分比之中間值，表面處理碳酸鈣之粒徑為處理前粒徑。

325目篩余：以濕式法將試樣篩分過濾，計算其殘留比例。

白度：以DSBD-1型數字白度儀測定之。

吸油量：JIS-K5101加入亞麻仁油滴至塊狀時測定。

水份：烘箱干燥法。

Average particle size:the middle value of accumulative percentages of particle size distribution tested by NSKC-1A

centritugal photosedimentometer and as surface-treated calcium carbonate it is referred to the pre-treated size。

Specfic surface area:tested by NSKC-1A centrifugal photosedimentometer

Residue of 325 Mesh:sieve the wetted sample and cacldate the residue proportion

Whitenness:tested by DSBD-1digital whiteness meter

Oil absorption:titrated by linseed Oil until block -shape appears and then tested by JIS-K5101

Moisture:tested by the drying oven method。

上述數據均為實驗室典型數據，僅供參考，不作為正式質保承諾。用戶如有特殊要求，可定制。